l i n u x - u s e r s - g r o u p - o f - d a v i s
L U G O D
 
Next Meeting:
October 7: Social gathering
Next Installfest:
TBD
Latest News:
Aug. 18: Discounts to "Velocity" in NY; come to tonight's "Photography" talk
Page last updated:
2002 Apr 24 11:49

The following is an archive of a post made to our 'vox-tech mailing list' by one of its subscribers.

Report this post as spam:

(Enter your email address)
[vox-tech] Lugod Demo Computer Hardware Details
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[vox-tech] Lugod Demo Computer Hardware Details



  Okay this message is an overview of the lugod demo computer
Hardware Setup (software details in separate mail).  I was 
thinking some information about the machine should be included 
on the website.  

  Let me know if I forgot details anything of interest.

    TTFN,
      Mike

Momentary tangent
=================
  On the website, I see a number of references to the machine in 
the meeting notes...

- http://lugod.org/meeting/past/2000.12.05.php?printable=yes
  saying it now has a Voodoo 5 card with 32 Megs, 
  and a set of speakers on the way from Pete.
- http://lugod.org/meeting/past/2001.02.06.php?printable=yes
  Saying the lugod machine has a pair of speakers from Henry.
- http://lugod.org/meeting/past/2001.08.20.php?printable=yes
  saying the CRT was being replaced with a LCD
- http://lugod.org/meeting/past/2002.04.15.php?printable=yes
  saying I had some intention to install Debian/stable on it

  Both pair of speakers and the Voodoo5 card are not part of
the bundle at the moment.  The Voodoo5 card was likely sold off
with the CRT, because this LCD panel has a funky digital connector
which would not work with standard analog video cards.  The speakers
may have simply been misplaced.

  Also, while the goal was to borrow the machine for a few days 
to setup a "stable for demo purposes" partition, the plan was to 
install the Woody release [*] and has morphed into me being
responsible for the machine.

*: Woody is currently "Debian/testing", but be finalized in May and 
   become the new "Debian/stable" replacing Potato.
=================


* I have not opened the case so I don't know for sure that I have the
SCSI card model correct, and I am repeating simply what the i2c stuff 
is reporting telling me about a memory configuration.


Machine Overview...
========================================
Tyan Tiger Motherboard, 440BX chipset.  BIOS v 1.16 (1208981730)
  one Pentium II 400 Mhz, 128 Megs RAM (in the form of one DIMM)

Ultra2 SCSI (80 Mhz, LVD, wide), 
  Host Bus Adapter: LSI Logic LVD, Wide, Ultra2 SCSI 
                    (Model: LSI8195U?) (chipset sym53c895 v 2.0) (BIOS v 1.10)
  Hard Drive:       18 Gig, 7200 RPM Quantum Atlas III  
                    (Model: QM318000TD-SW) (Rev: N491)

UDMA-33 IDE (two PIIX4 controllers),
  Toshiba CD-ROM (UDMA 33)

10/100 Tulip Ethernet Adapter
  eth0: Lite-On 82c168 PNIC rev 32 at 0xe400, 00:C0:F0:5C:00:1B, IRQ 17.

S3 Savage4 Video Card, 16 Megs RAM
  15", 1024x768, IBM LCD monitor (or TFT) model T541 9513-DW1

PS/2 Logitech Mouse
White 104 key keyboard (with Windows keys)

Vibra16 PnP sound card, (not tested: no speakers).
Machine appears to have modem card, (not tested: no ISP).
Machine has USB ports, (not tested: no devices).
========================================


  There was a suggestion that we upgrade the computer, this section is
to address that...
========================================
  The motherboard takes 100 Mhz SDRAM unbuffered ECC Registered 3.3V DIMMs,
and has four slots which accept upto 256 Meg 168-pin DIMMS.  The
motherboard has room for two Slot 1 processors, and can accept upto 
Pentium III 850 Mhz (100 Mhz FSB).

Manufacturer's website for motherboard details:
http://www.tyan.com/products/html/a_tiger100.html

Supported CPU list...
http://www.tyan.com/support/html/PentiumII_III_PPGA.html
# Tiger 100 S1832
# Celeron                      [up to 466** - single]
# PentiumII         Deschutes  [233-450 *]
# PentiumIII 100Mhz Katmai     [450-600]
# PentiumIII 133Mhz            [None]
# PentiumIII 100Mhz Coppermine [600-850 (Rev. F and later only )]
# PentiumIII 133Mhz Coppermine [None]

Quick scan of market prices for stuff:
  256 Meg, 168 Pin, 100 Mhz, SDRAM, 3.3 V, ECC, Registered - $80-100 each
  CPU 850 Mhz Slot 1, Pentium III, 100 Mhz, $170
  CPU 800 Mhz Slot 1, Pentium III, 100 Mhz, $150

  Based on what I see this model of processor is very hard to find in the
retail channel and has probably been discontinued.  The memory is also 
slightly exotic at this point... (it used to sell for about $20 a DIMM)
and is more expensive that it needs to be.

  I think it could certainly use some more memory, and by modern standards 
the CPU is slow (but acceptable).  Unfortunately (for me) I think the
machine isn't actually used enough for club use to spend a bunch of
money upgrading it.

  In order to support the faster P-III processors at their native rate
a BIOS flash upgrade is required, if I'm not mistaken that upgrade will 
make the board not support the current P-II processor it has.  I may
want to check with Tyan tech support about the correct upgrade ordering,
because I gather that CPU voltage changes are controlled by the BIOS,
each revision has support for a particular range of processors, and I 
could imagine needing to step to some middle common ground version 
so that the processor(s) don't fry.
========================================


Now the Details... as extracted from a variety of programs [with some trimming]
========================================
========================================
========================================

root@star:~# uname -a
========================================
Linux star 2.4.18 #1 Tue Apr 23 02:57:43 PDT 2002 i686 unknown
========================================

root@star:~# lspci
========================================
00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02)
00:11.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20)
00:13.0 SCSI storage controller: LSI Logic / Symbios Logic (formerly NCR) 53c895 (rev 02)
01:00.0 VGA compatible controller: S3 Inc. Savage 4 (rev 03)
========================================

root@star:~# cat /proc/cpuinfo
========================================
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 5
model name      : Pentium II (Deschutes)
stepping        : 3
cpu MHz         : 400.918
cache size      : 512 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 mmx fxsr
bogomips        : 799.53
========================================

root@star:~# cat /proc/meminfo
========================================
        total:    used:    free:  shared: buffers:  cached:
Mem:  130035712 126091264  3944448        0  6160384 85618688
Swap: 537911296 53977088 483934208
========================================

root@star:~# cat /proc/isapnp
========================================
Card 1 'CTL00f0:Creative ViBRA16X PnP' PnP version 1.0 Product version 1.0
  Logical device 0 'CTL0043:Audio'
    Device is active
    Active port 0x220,0x330,0x388
    Active IRQ 5 [0x2]
    Active DMA 1,3
[...]
  Logical device 1 'CTL7005:Game'
    Compatible device PNPb02f
    Device is active
    Active port 0x201
========================================


root@star:~# sensors
========================================
lm79-i2c-0-2d
Adapter: SMBus PIIX4 adapter at 0440
Algorithm: Non-I2C SMBus adapter
VCore 1:   +2.04 V  (min =  +1.90 V, max =  +2.09 V)
VCore 2:   +2.06 V  (min =  +1.90 V, max =  +2.09 V)
+3.3V:     +3.29 V  (min =  +3.13 V, max =  +3.45 V)
+5V:       +5.16 V  (min =  +4.72 V, max =  +5.24 V)
+12V:     +11.67 V  (min = +11.36 V, max = +12.58 V)
-12V:     -11.79 V  (min = -11.33 V, max = -12.55 V)
-5V:       -5.15 V  (min =  -4.74 V, max =  -5.24 V)
fan2:     4141 RPM  (min = 3000 RPM, div = 2)
temp:      +30.0C  (limit =  +60C, hysteresis =  +50C)
vid:      +2.00 V
alarms:   Board temperature input (usually LM75 chips)
alarms:   Chassis intrusion detection

lm75-i2c-0-4c
Adapter: SMBus PIIX4 adapter at 0440
Algorithm: Non-I2C SMBus adapter
temp:      +32.0C  (limit = +60.0C, hysteresis = +50.0C)

lm75-i2c-0-4d
Adapter: SMBus PIIX4 adapter at 0440
Algorithm: Non-I2C SMBus adapter
temp:      +32.5C  (limit = +60.0C, hysteresis = +50.0C)

eeprom-i2c-0-50
Adapter: SMBus PIIX4 adapter at 0440
Algorithm: Non-I2C SMBus adapter
Memory type:            SDRAM DIMM SPD
SDRAM Size (MB):        128
========================================

root@star:~# cat /proc/ide/piix
========================================
                                Intel PIIX4 Ultra 33 Chipset.
--------------- Primary Channel ---------------- Secondary Channel -------------                 enabled                          enabled
--------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------DMA enabled:    no               yes             no                no
UDMA enabled:   no               yes             no                no
UDMA enabled:   X                2               X                 X
UDMA
DMA
PIO
========================================

root@star:~# for l in /proc/ide/ide*/hd*/model; do echo -n "$l: "; cat $l; done
========================================
/proc/ide/ide0/hdb/model: TOSHIBA CD-ROM XM-6502B
========================================

root@star:~# hdparm /dev/hdb 2> /dev/null
========================================
/dev/hdb:
 I/O support  =  1 (32-bit)
 unmaskirq    =  1 (on)
 using_dma    =  1 (on)
 keepsettings =  0 (off)
 readonly     =  1 (on)
 readahead    =  8 (on)
 busstate     =  1 (on)
========================================

root@star:~# hdparm -I /dev/hdb
========================================
/dev/hdb:

ATAPI CD-ROM, with removable media
        Model Number:           TOSHIBA CD-ROM XM-6502B
        Serial Number:
        Firmware Revision:      1013
Standards:
        Used: ATAPI for CD-ROMs, SFF-8020i, r2.5
        Supported: CD-ROM ATAPI-2
Configuration:
        DRQ response: 50us.
        Packet size: 12 bytes
Capabilities:
        LBA, IORDY(can be disabled)
        Buffer size: 256.0kB
        DMA: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 *udma2
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4
             Cycle time: no flow control=120ns  IORDY flow control=120ns
========================================

========================================
root@star:~# cat /etc/fstab

# <file system> <mount point> <type> <options>                     <dump> <pass>/dev/sda1      /        ext3     defaults,errors=remount-ro                 0 1
/dev/sda2      none     swap     sw,pri=1                                   0 0
/dev/sda3      /home    ext3     defaults,errors=remount-ro                 0 2
proc           /proc    proc     defaults                                   0 0
/dev/fd0       /floppy  auto     defaults,user,noauto                       0 0
/dev/cdrom     /cdrom   iso9660  defaults,ro,user,noauto                    0 0
========================================


root@star:~# fdisk -l /dev/sda
========================================
Disk /dev/sda: 64 heads, 32 sectors, 17366 cylinders
Units = cylinders of 2048 * 512 bytes

   Device Boot    Start       End    Blocks   Id  System
/dev/sda1   *         1      6145   6292464   83  Linux
/dev/sda2          6146      6658    525312   82  Linux swap
/dev/sda3          6659     17366  10964992   83  Linux
========================================

root@star:~# df
========================================
Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/sda1              6192512   1345112   4532780  23% /
/dev/sda3             10878560   6529368   3800944  64% /home
========================================

root@star:~# scsiinfo -a /dev/sda
========================================
Inquiry command
---------------
Wide bus 16                        1
Synchronous neg.                   1
Linked Commands                    1
Command Queueing                   1
Vendor:                    QUANTUM 
Product:                   QM318000TD-SW   
Revision level:            N491321911250522

Serial Number 'PCB=20-116711-06; HDA=321911250522'

Data from Rigid Disk Drive Geometry Page
----------------------------------------
Number of cylinders                8057
Number of heads                    20
Starting write precomp             8057
Rotational Rate                    7200

Data from Caching Page
----------------------
Write Cache                        1
Read Cache                         1
Minimum Pre-fetch                  0
Maximum Pre-fetch                  541
Maximum Pre-fetch Ceiling          541

Data from Defect Lists
----------------------
246 entries in manufacturer table.
321 entries in grown table.
========================================

root@star:~# bonnie++ -u nobody -d /tmp -s 1024 -n 0 -f
========================================
Version 1.02b       ------Sequential Output------ --Sequential Input- --Random-
                    -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine        Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP  /sec %CP
star             1G           10648  16  5644   8           11700   7  94.4   0
========================================
The hard drive is spec'ed to do 13.75 to 22.5 MiB/s to and from the media.
I'm not seeing anything about 13 MiB/s... this controller driver doesn't 
print much.


from X -probeonly
========================================
(--) Chipset Savage4 found
(II) Module vgahw: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 0.1.0
(**) SAVAGE(0): Depth 24, (--) framebuffer bpp 32
(==) SAVAGE(0): RGB weight 888
(==) SAVAGE(0): Default visual is TrueColor
(==) SAVAGE(0): Using HW cursor
(==) SAVAGE(0): Using video BIOS to set modes
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(--) SAVAGE(0): Chip: id 8a22, "Savage4"
(--) SAVAGE(0): Engine: "Savage4"
(--) SAVAGE(0): mapping MMIO @ 0xff980000 with size 0x80000
(==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) SAVAGE(0): probed videoram:  16384k
(--) SAVAGE(0): No DDC signal
========================================

root@star:~# dmesg
========================================
Linux version 2.4.18 (root@star) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Tue Apr 23 02:57:43 PDT 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
found SMP MP-table at 000fb570
hm, page 000fb000 reserved twice.
hm, page 000fc000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
On node 0 totalpages: 32768
zone(0): 4096 pages.
zone(1): 28672 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: INTEL    Product ID: 440GX        APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 1
Kernel command line: auto BOOT_IMAGE=Linux ro root=801
Initializing CPU#0
Detected 400.918 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 799.53 BogoMIPS
Memory: 126772k/131072k available (1054k kernel code, 3912k reserved, 353k data, 216k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0183fbff 00000000 00000000 00000000
CPU:             Common caps: 0183fbff 00000000 00000000 00000000
CPU: Intel Pentium II (Deschutes) stepping 03
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000004
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-9, 2-10, 2-11, 2-18, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 18.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  0    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 000 00  1    0    0   0   0    0    0    00
 0a 000 00  1    0    0   0   0    0    0    00
 0b 000 00  1    0    0   0   0    0    0    00
 0c 001 01  0    0    0   0   0    1    1    71
 0d 001 01  0    0    0   0   0    1    1    79
 0e 001 01  0    0    0   0   0    1    1    81
 0f 001 01  0    0    0   0   0    1    1    89
 10 001 01  1    1    0   1   0    1    1    91
 11 001 01  1    1    0   1   0    1    1    99
 12 000 00  1    0    0   0   0    0    0    00
 13 001 01  1    1    0   1   0    1    1    A1
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ19 -> 0:19
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 400.9263 MHz.
..... host bus clock speed is 100.2313 MHz.
cpu: 0, clocks: 1002313, slice: 501156
CPU0<T0:1002304,T1:501136,D:12,S:501156,C:1002313>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI->APIC IRQ transform: (B0,I7,P3) -> 19
PCI->APIC IRQ transform: (B0,I17,P0) -> 17
PCI->APIC IRQ transform: (B0,I19,P0) -> 19
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: Calling quirk for 01:00
isapnp: SB audio device quirk - increasing port range
isapnp: Card 'Creative ViBRA16X PnP'
isapnp: 1 Plug & Play card detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 128 slots per queue, batch=32
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:DMA
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hdb: TOSHIBA CD-ROM XM-6502B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdb: ATAPI 40X CD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.12
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
tulip0:  MII transceiver #1 config 3100 status 7829 advertising 01e1.
eth0: Lite-On 82c168 PNIC rev 32 at 0xe400, 00:C0:F0:5C:00:1B, IRQ 17.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 96M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 64M @ 0xf8000000
SCSI subsystem driver Revision: 1.00
sym.0.19.0: setting PCI_COMMAND_PARITY...
sym0: <895> rev 0x2 on pci bus 0 device 19 function 0 irq 19
sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.17a
  Vendor: QUANTUM   Model: QM318000TD-SW     Rev: N491
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 6, lun 0
sym0:6: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
SCSI device sda: 35566500 512-byte hdwr sectors (18210 MB)
Partition check:
 sda: sda1 sda2 sda3
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 216k freed
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,1), internal journal
Real Time Clock Driver v1.10e
usb-uhci.c: $Revision: 1.275 $ time 03:11:50 Apr 23 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xef80, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
eth0: Setting full-duplex based on MII#1 link partner capability of 05e1.
i2c-piix4.o version 2.6.2 (20011118)
i2c-piix4.o: Found PIIX4 device
i2c-dev.o: Registered 'SMBus PIIX4 adapter at 0440' as minor 0
i2c-core.o: adapter SMBus PIIX4 adapter at 0440 registered as adapter 0.
i2c-piix4.o: SMBus detected and initialized
Adding Swap: 525304k swap-space (priority 1)
lm78.o version 2.6.2 (20011118)
i2c-core.o: driver LM78(-J) and LM79 sensor driver registered.
i2c-core.o: client [LM79 chip] registered to adapter [SMBus PIIX4 adapter at 0440](pos. 0).
lm75.o version 2.6.2 (20011118)
i2c-core.o: driver LM75 sensor chip driver registered.
i2c-core.o: client [LM75 chip] registered to adapter [SMBus PIIX4 adapter at 0440](pos. 1).
i2c-core.o: client [LM75 chip] registered to adapter [SMBus PIIX4 adapter at 0440](pos. 2).
eeprom.o version 2.6.2 (20011118)
i2c-core.o: driver EEPROM READER registered.
i2c-core.o: client [EEPROM chip] registered to adapter [SMBus PIIX4 adapter at 0440](pos. 3).
========================================
_______________________________________________
vox-tech mailing list
vox-tech@lists.lugod.org
http://lists.lugod.org/mailman/listinfo/vox-tech



LinkedIn
LUGOD Group on LinkedIn
Sign up for LUGOD event announcements
Your email address:
facebook
LUGOD Group on Facebook
'Like' LUGOD on Facebook:

Hosting provided by:
Sunset Systems
Sunset Systems offers preconfigured Linux systems, remote system administration and custom software development.

LUGOD: Linux Users' Group of Davis
PO Box 2082, Davis, CA 95617
Contact Us

LUGOD is a 501(c)7 non-profit organization
based in Davis, California
and serving the Sacramento area.
"Linux" is a trademark of Linus Torvalds.

Sponsored in part by:
O'Reilly and Associates
For numerous book donations.